Bình chữa cháy CO2 – MT5

1,020,000 ₫

A fire extinguisher is a fire protection device used to extinguish or control small fires, usually in an emergency situation. Typically, a fire extinguisher with a round cylindrical shape has a pressure valve, inside which contains substances that can extinguish fire.

Fire extinguisher is a powder fire protection device of two types:
– Type with its own propellant gas cylinder.
– The type does not have its own propellant cylinder but feeds the gas directly into the powder tank (MFZ cylinder – China).

Mô tả
Đánh giá (0)

CO2 Fire Extinguisher – MT5

Detailed description

A CO2 fire extinguisher – MT5 is a fire protection device used to extinguish or control small fires, usually in emergency situations. Typically, a fire extinguisher with a round cylindrical shape has a pressure valve, inside which contains substances that can extinguish fire.

Hotline: 094 191 7491

China’s dry powder fire extinguisher symbol MFZ (BC) or MFZL (ABC) is a highly mobile fire extinguisher that uses nitrogen gas loaded in the tank to push the powder out.
The workwear fire extinguishers are made of pressurized steel. Propellant gas is usually N2, CO2 … The valve assembly is attached to the lid, can be removed to refill powder and gas after use. The lock valve can be a squeeze valve or a screw valve, the lock valve is clamped by lead. Metal spray speakers. The fire extinguisherpainted red on it has the necessary information written on it.

CO2 Gas Fire Extinguisher – MT5 – Handy compact fire extinguisher specializing in firefighting in homes, offices, schools.

With the CO2 MT5 fire extinguisher of portable type, you can quickly extinguish a fire. At home, office, company and workshop…. Therefore, you should equip your factory, showroom, company with a Co2 fire extinguisher, or MFZ, BC, ABC powder cylinder. Prevent fire and explosion.

– CO2 cylinders used for electrical fire fighting (low, medium and high voltage).

– CO2 cylinders do not cure burning metals, arcs and some oxygen-rich substances.

2. Usage

When a fire occurs, move the tank closer to the fire point, jerk the arresting pin.

Choose the flame directional end, point the spray speaker as close to the flame as possible.

Squeeze (or twist) the valve to allow the gas to spray itself to put out the fire.

3. How to check co2 fire extinguisher maintenance:

– Place the jar in a shady, conspicuous, easy-to-access, convenient place to use. Do not leave the tank in a place with a high temperature exceeding 550C, which can easily cause a pressure surge, leading to an explosion of the tank if the safety valve does not work.

– Regularly check, maintain and replace if damage is found in tank parts: Injectors, nozzles, lock valves. Repair and replace leaking gas tanks.

– Method of checking the amount of CO2 in the tank: The common method is the weighing method, if the amount of CO2 is reduced compared to the original amount of CO2, the tank leaks gas. So you can recharge.

Attention when using CO2 MT5 5kg fire extinguisher

Before spraying in a closed room, everyone must be notified to leave the room, must plan an exit after spraying CO2 gas because when sprayed, it will produce very toxic CO.
Because the CO2 MT5 5kg fire extinguisher has many types, it is necessary to read the instructions, carefully grasp the performance features of each type of fire to arrange fire suppression accordingly.
When spraying, the jar must be held upright, standing at the head of the wind direction (external fire); Standing near the door (internal fire), the fire must be completely extinguished to stop spraying.
When extinguishing liquid fires, it must be sprayed to cover the burning surface, avoid spraying directly on the liquid to prevent them from splashing out, burning louder.
In case of cold burns, only hold the plastic, rubber on the nozzle and spray speaker, lever, when finished spraying avoid holding the bottle directly.

Hotline: 094 191 7491